Lumina is front faced with 'Senoplast' Acrylic, a very highly finished material, just like a bathtub. Your gloss doors will be supplied with a protective film on the front of the product. We advise that the film should only be removed once the installation has been completed. The product will need around 72 hours to fully cure and harden once the film has been removed. This means that the doors will be liable to scratching and other marks during this initial time. We do not recommend that you clean the doors for at least a few days to prevent any damage to the surface/ finish of the product.
Please be careful not to puncture the surface of the product as this will allow moisture ingress and will cause the MDF core to deteriorate.
Cleaning and caring for the door
It is advisable to clean both the back and front surfaces of the product. Where possible, use a soft damp microfibre cloth, taking particular care to wipe the surface and edges dry. We do not recommend that you use a gloss cleaner on the product as plain water is sufficient for regular cleaning. Always use a lint free cloth and use a circular motion to achieve a high gloss buff. We also recommend using a clean/dust free microfibre cloth as these are perfect for achieving a high shine with very little effort.
Avoid any agents that contain ammonia, alcohol, bleach, or an abrasive. If the surface of the product is exposed to any oil-based substance (for example olive oil, butter, margarine, or cooking oil), the spillage must be wiped away immediately to prevent staining.
High gloss finishes do sometimes show fingerprints – but these can easily be removed with a soft, clean cloth.